- Joined
- Dec 17, 2025
- Messages
- 6,107
- Solutions
- 4
- Time Online
- 14d 48m
- Reputation
- 13,862
- Location
- Washington D.C, Israel
My current thought is to get a 30G to reconstitute and 32G to pin, is this a good idea?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
30G is far too thin to dilute reta. The needle tip will become blunt when piercing the rubber stopper of the bottle, and the pressure created when pumping the liquid in can damage the peptideI was thinking to reconstitute reta, what guage needle do u recommended to reconstitute?
Tbf there's a lot near mejust ask local H addict
lots of advice to get thereTbf there's a lot near me
@pearex Your time to shineMy current thought is to get a 30G to reconstitute and 32G to pin, is this a good idea?
Ye thought so, I dont remember much I learned bout pinningThat’s fine if it’s for Peptides
I bought the first ones i found on amazon, not that deepMy current thought is to get a 30G to reconstitute and 32G to pin, is this a good idea?
@pearex Your time to shine
While theoretically possible to dilute with 30G and inject with 32G it is unnecessarily difficult and risky in practical application. Even 30G is too thin for diluting a drug 32G requires very high pressure during injectionMy current thought is to get a 30G to reconstitute and 32G to pin, is this a good idea?
I was thinking to reconstitute reta, what guage needle do u recommended to reconstitute?While theoretically possible to dilute with 30G and inject with 32G it is unnecessarily difficult and risky in practical application. Even 30G is too thin for diluting a drug 32G requires very high pressure during injection
also once you reconstitute you can just let it sit for like 30 seconds till it dissolves, dont shake the vial, you can roll it between your handsget syringes and needles separately
18-20g to reconstitute
try not hit the lyophilized powder directly it can affect potency, aim for the side of the vial, refrigerate after reconstitution
25g for im injection, 25-30g 5/16" for subq depending on how much adipose tissue the area has 5/8 works too but if you're using longer needles try to do 45 degrees
Ye ik thtalso once you reconstitute you can just let it sit for like 30 seconds till it dissolves, dont shake the vial, you can roll it between your hands
30G is far too thin to dilute reta. The needle tip will become blunt when piercing the rubber stopper of the bottle, and the pressure created when pumping the liquid in can damage the peptideI was thinking to reconstitute reta, what guage needle do u recommended to reconstitute?