- Joined
- Feb 15, 2025
- Messages
- 9,090
- Online time
- 1d 23h
- Reputation
- 15,761
Guide to Making The Ultimate Leave In Hair Conditioner
Materials Required:
1. Active Ingredient: Dihydrotestosterone (DHT)
- Obtain from a reputable source (pharmacies, laboratories).
2. Gel Base:
- Common gelling agents include:
- Hydroxyethyl cellulose (HEC)
- Carbomer
- Aloe vera gel (natural option)
3. Solvent:
- Water or ethanol
4. Preservatives:
- Benzyl alcohol or phenoxyethanol to prevent microbial growth.
5. pH Adjuster (if using Carbomer):
- Triethanolamine (TEA) or sodium hydroxide.
6. Measuring Instruments:
- Precision scale
- Measuring cylinders or pipettes
- pH meter
7. Mixing Equipment:
- Stirring rod or magnetic stirrer
- Beakers
Procedure:
1. Preparation of Gel Base:
- For Hydroxyethyl Cellulose (HEC):
- Disperse HEC powder in water while stirring slowly to avoid clumping. Let it hydrate for several hours.
- For Carbomer:
- Disperse Carbomer in water while stirring. Allow it to swell and hydrate for a minimum of 30 minutes.
2. Dissolution of DHT:
- Measure out the desired dose of DHT and dissolve it in a small amount of ethanol or water. Heat slightly if necessary to ensure complete dissolution.
3. Combine DHT with Gel Base:
- Slowly add the dissolved DHT solution to the prepared gel base while continuously stirring to ensure uniform distribution.
4. Adjusting pH (if applicable):
- If using Carbomer, adjust the pH to the desired level (usually around 5.5 to 7.0) using a pH adjuster. Add TEA or sodium hydroxide dropwise while mixing until the desired pH is reached.
5. Incorporating Preservatives:
- If added, mix in the preservative thoroughly after achieving uniformity in the gel.
6. Final Mixing:
- Continue to stir the gel to ensure homogeneity. Ensure that there are no lumps or undissolved particles.
7. Storage:
- Transfer the finished DHT gel to a clean, sterilized container. Store it in a cool, dry place away from direct sunlight.
Apply to your hair at night to see instant hair growth, thickening and quality
Materials Required:
1. Active Ingredient: Dihydrotestosterone (DHT)
- Obtain from a reputable source (pharmacies, laboratories).
2. Gel Base:
- Common gelling agents include:
- Hydroxyethyl cellulose (HEC)
- Carbomer
- Aloe vera gel (natural option)
3. Solvent:
- Water or ethanol
4. Preservatives:
- Benzyl alcohol or phenoxyethanol to prevent microbial growth.
5. pH Adjuster (if using Carbomer):
- Triethanolamine (TEA) or sodium hydroxide.
6. Measuring Instruments:
- Precision scale
- Measuring cylinders or pipettes
- pH meter
7. Mixing Equipment:
- Stirring rod or magnetic stirrer
- Beakers
Procedure:
1. Preparation of Gel Base:
- For Hydroxyethyl Cellulose (HEC):
- Disperse HEC powder in water while stirring slowly to avoid clumping. Let it hydrate for several hours.
- For Carbomer:
- Disperse Carbomer in water while stirring. Allow it to swell and hydrate for a minimum of 30 minutes.
2. Dissolution of DHT:
- Measure out the desired dose of DHT and dissolve it in a small amount of ethanol or water. Heat slightly if necessary to ensure complete dissolution.
3. Combine DHT with Gel Base:
- Slowly add the dissolved DHT solution to the prepared gel base while continuously stirring to ensure uniform distribution.
4. Adjusting pH (if applicable):
- If using Carbomer, adjust the pH to the desired level (usually around 5.5 to 7.0) using a pH adjuster. Add TEA or sodium hydroxide dropwise while mixing until the desired pH is reached.
5. Incorporating Preservatives:
- If added, mix in the preservative thoroughly after achieving uniformity in the gel.
6. Final Mixing:
- Continue to stir the gel to ensure homogeneity. Ensure that there are no lumps or undissolved particles.
7. Storage:
- Transfer the finished DHT gel to a clean, sterilized container. Store it in a cool, dry place away from direct sunlight.
Apply to your hair at night to see instant hair growth, thickening and quality
