- Joined
- Feb 20, 2025
- Messages
- 21,628
- Solutions
- 2
- Time Online
- 1mo 23d
- Reputation
- 56,747
- Location
- The Wonderland
Hello all my fans, it's Me
(Picture of Me)
Today I will be gifting you fuckers knowledge with how to do a nosejob at home with the price tag of only around £20, with the use of lypolitics a needle.
This thread is mainly for refining the nose and reducing bulbosity
If you want to reduce the nose tip size, this thread is perfect
IF you want to reduce nostril size, this thread is perfect.
If you want to improve the nasolabial angle/fix droopy tip, this thread is perfect.
If you want to refine the nose bridge, this thread is perfect.
If you want to fix your bird beak Daniel Larson ass nose made out of pure fucking bone, this thread is not for you.
Trvth Nuking The Low IQs
This of course varies on anatomy, people with an already refined nose will most likely have snatched fat and skin where if they were to touch their nose it'd have minimal squish. A nose with less fat and skin would also have a very clear soft border of where the cartilage appears, rather than softness in the nose tip
The nostrils are special, since it's only made up of fat and skin in all people essentially.
The Equipment
Will roughly be £30, the goal is to get both aqualyx and lipolab to make the lypolitic cocktail that the nose can handle (10-20% aqualyx with the rest being lipolab), if you were to inject straight aqualyx into your nose you'd burn through the skin (I was retarded and done this ages ago)
(Picture of Me)
Today I will be gifting you fuckers knowledge with how to do a nosejob at home with the price tag of only around £20, with the use of lypolitics a needle.
This thread is mainly for refining the nose and reducing bulbosity
If you want to reduce the nose tip size, this thread is perfect
IF you want to reduce nostril size, this thread is perfect.
If you want to improve the nasolabial angle/fix droopy tip, this thread is perfect.
If you want to refine the nose bridge, this thread is perfect.
If you want to fix your bird beak Daniel Larson ass nose made out of pure fucking bone, this thread is not for you.
Trvth Nuking The Low IQs
This of course varies on anatomy, people with an already refined nose will most likely have snatched fat and skin where if they were to touch their nose it'd have minimal squish. A nose with less fat and skin would also have a very clear soft border of where the cartilage appears, rather than softness in the nose tip
The nostrils are special, since it's only made up of fat and skin in all people essentially.
The Equipment
Will roughly be £30, the goal is to get both aqualyx and lipolab to make the lypolitic cocktail that the nose can handle (10-20% aqualyx with the rest being lipolab), if you were to inject straight aqualyx into your nose you'd burn through the skin (I was retarded and done this ages ago)
- A vial of aqualyx (deoxycholic acid, will be the primary fat dissolver)
Filler Warehouse - Aqualyx Fat Dissolve - 1 Vial x 8ml
Buy now from Filler Warehouse Online UK - Aqualyx Fat Dissolve - 1 Vials x 8ml - A popular fat dissolve at a highly competitive price. Delivery options available from £5.99 UK and next day for your convenience.
filler-warehouse.co.uk
- A vial of Lipolab (Phosphatidylcholine breaks down fat but in a more tame manner, Sodium Deoxycholate which emulsifies fat making it easier, L-Carnitine which increases fat metabolism). This will be used to essentially dilute the cocktail.
Filler Warehouse - Lipo Lab - Single Vial
Buy now at Filler Warehouse - Lipo Lab & Lipo S-Line PPC Solution (1 x 10ml vials)Lipo Lab PPC Solution is an innovative and effective fat dissolving injection intended for reduction of fat in targeted areas and the melting of subcutaneous fat. Buy now from Filler Warehouse Lipo Lab with next...
filler-warehouse.co.uk
- 6mm Insulin syringes (the mm depth that you will be using will be around 2-4mm typically during this)
You will become blind if you inject liquids into an artery, it will flow through the artery to the eye and blind you
Your skin will burst or die off if you inject too quickly or just pin too much in one area
If you pin at the bone layer (wtf are you doing) you will enter severe pain
If you done a successful injection(s), but you lay down after for a long period of time, the fluids will migrate and enter the wrong areas, that being potentially the eyes.
Your skin will burst or die off if you inject too quickly or just pin too much in one area
If you pin at the bone layer (wtf are you doing) you will enter severe pain
If you done a successful injection(s), but you lay down after for a long period of time, the fluids will migrate and enter the wrong areas, that being potentially the eyes.
The cocktail
We are going to make a cocktail that is in total 50 units/half a ml of liquid (Aqualyx concentration 20%)
- Draw Aqualyx first into the insulin syringe, about 10units
- Then draw lipolab and fill the syringe to the 50unit mark, this then creates the 20% aqualyx 80% lipolab cocktail
- Bubble mix within the syringe, draw air to the 100unit mark and flip the syringe upside down and rightside over repeatedly so the air pushes the liquid up and down (flick the needle a bit if the liquid stalls) do this for 60 seconds
I will split up each section of the nose here, so if you want to do nose tip only then you just have to open up one section for example
Skin layer is the first initial piercing of the needle, it's tough to pierce into
Fat layer comes after, it's that feeling when the needle feels smooth in the flesh
Bone/cartilage is like bedrock, if you push the needle it won't go further, the fat layer is usually 2mm back from it
If skin turns white during injection, it means too much pressure and blood isn't circulating, this can be normal if you inject too fast, but if it persists even after injection then warm and massage the area
Recommended doses in this section: 0.2ml - 0.4ml (My personally used dose was 0.3ml/30 units)
For width, start by finding the crease of the nose tip and the nostril
I drew a rough crease, with a standardised straight line in yellow. you don't have to draw line on your face, just find the crease skin.
This should be very visible, we are going to place Dot 1 (lower side nose tip), grab a ruler or a measuring tape of some sort, measure 2-3mm from the crease towards the nose tip, place a dot with a marker on that spot.
Should look similar, not identical, I do not have a ruler in drawing.
Now, using Dot 1 as a landmark, use your measuring tool and go 1cm above Dot 1 to mark Dot 2
Now in reality, the dots are probably going to be a bit more to the side possibly, just go accordingly with measurements and feel of the nose sections, rather than pure visuals of my drawings. Mirror this on the opposite side.
Insert the needle 3-4mm deep from a side angle
Aspirate (should know what this is already)
Inject slow if aspiration is a success
Repeat process in other dots
For width, start by finding the crease of the nose tip and the nostril
I drew a rough crease, with a standardised straight line in yellow. you don't have to draw line on your face, just find the crease skin.
This should be very visible, we are going to place Dot 1 (lower side nose tip), grab a ruler or a measuring tape of some sort, measure 2-3mm from the crease towards the nose tip, place a dot with a marker on that spot.
Should look similar, not identical, I do not have a ruler in drawing.
Now, using Dot 1 as a landmark, use your measuring tool and go 1cm above Dot 1 to mark Dot 2
Now in reality, the dots are probably going to be a bit more to the side possibly, just go accordingly with measurements and feel of the nose sections, rather than pure visuals of my drawings. Mirror this on the opposite side.
Insert the needle 3-4mm deep from a side angle
Aspirate (should know what this is already)
Inject slow if aspiration is a success
Repeat process in other dots
Recommended doses in this section: 0.2ml (My personally used dose was 0ml lmao, if I nuked this shit I'd become a jew)
For projection, start by finding the midline of the nose, mark the very centre dot.
btw the actual pic of this person's nose is slightly angled, hence why my markings look off
From dot 1, if you want to reduce the projection of your Supratip break (image below) then mark dot 2 AROUND 1cm above dot 1.
(feel around your nose, make sure you want marking the nasal bridge which feels like hard cartilage, make sure your dot feels like it's on a fatty bulb)
(Note: The lower portion of the nose will be in a separate section, do not worry)
Pinch fat optionally, for dot 1, insert needle 3mm deep at an upward angle
Aspirate
Inject slowly
For dot 2, repeat but choose a smaller dose if considerate, can inject from a downward angle also
For projection, start by finding the midline of the nose, mark the very centre dot.
btw the actual pic of this person's nose is slightly angled, hence why my markings look off
From dot 1, if you want to reduce the projection of your Supratip break (image below) then mark dot 2 AROUND 1cm above dot 1.
(feel around your nose, make sure you want marking the nasal bridge which feels like hard cartilage, make sure your dot feels like it's on a fatty bulb)
(Note: The lower portion of the nose will be in a separate section, do not worry)
Pinch fat optionally, for dot 1, insert needle 3mm deep at an upward angle
Aspirate
Inject slowly
For dot 2, repeat but choose a smaller dose if considerate, can inject from a downward angle also
Recommended doses in this section: 0.1-0.2ml
For people suffering from a droopy nose tip, this can be improved through doing this.
First, feel around the bottom of the nose, specifically the joint centre of the 2 nostrils. The goal here is to feel the separation between the cartilage zone and the fatty area, the cartilage zone
An easy way to do this is by doing a pig nose with your finger (pushing your nose tip up with your finger from the bottom). By then you can feel the cartilage resistance and then the part where it's fatty.
Under red line = cartilage
Make a mental map of this redline.
2mm from this line, draw dot 1 in the centre of the lower nose tip
2-3mm from dot 1 diagonally up and to the side, mark dot 2
Now, mirror this for the opposite side.
Insert the needle 2-3mm deep
For dot 1, angle it from underneath the nose tip, dot 2 slightly diagonally underneath, same on the other side
Aspirate each time
Inject slowly
For people suffering from a droopy nose tip, this can be improved through doing this.
First, feel around the bottom of the nose, specifically the joint centre of the 2 nostrils. The goal here is to feel the separation between the cartilage zone and the fatty area, the cartilage zone
An easy way to do this is by doing a pig nose with your finger (pushing your nose tip up with your finger from the bottom). By then you can feel the cartilage resistance and then the part where it's fatty.
Under red line = cartilage
Make a mental map of this redline.
2mm from this line, draw dot 1 in the centre of the lower nose tip
2-3mm from dot 1 diagonally up and to the side, mark dot 2
Now, mirror this for the opposite side.
Insert the needle 2-3mm deep
For dot 1, angle it from underneath the nose tip, dot 2 slightly diagonally underneath, same on the other side
Aspirate each time
Inject slowly
Recommended doses in this section: 0.2ml - 0.3ml
This section is heavily anatomy dependant, for someone like me I have a normal convex nasal bridge with minimal flatness, other people might have a flatter nasal bridge, this makes it hard to mark. Also you may not even need to do this if yours is already refined. Most pictures also don't have shadows visible enough to see where bone is, so my markings will look shitty.
Also, dissolving this area may make your 3/4th look less straight if you inject too high up (not vertically) the nasal wall
For dot 1, place it 1cm above where dot 2 would've been placed in the "Nose Width" section. Make sure it's high on the side of the nasal wall and not near the base, about 2mm from the centre bone.
From dot 1, place dot 2 1cm above as followed
And if you have a longer nose, you can even do a dot 3 1cm above dot 2, always stop once you reach near the medial canthus start of the eye.
Pinching fat is recommended for helping the needle pierce
Go 2mm deep
Aspirate
Inject slowly
This section is heavily anatomy dependant, for someone like me I have a normal convex nasal bridge with minimal flatness, other people might have a flatter nasal bridge, this makes it hard to mark. Also you may not even need to do this if yours is already refined. Most pictures also don't have shadows visible enough to see where bone is, so my markings will look shitty.
Also, dissolving this area may make your 3/4th look less straight if you inject too high up (not vertically) the nasal wall
For dot 1, place it 1cm above where dot 2 would've been placed in the "Nose Width" section. Make sure it's high on the side of the nasal wall and not near the base, about 2mm from the centre bone.
From dot 1, place dot 2 1cm above as followed
And if you have a longer nose, you can even do a dot 3 1cm above dot 2, always stop once you reach near the medial canthus start of the eye.
Pinching fat is recommended for helping the needle pierce
Go 2mm deep
Aspirate
Inject slowly
Recommended doses in this section: 0.2ml
This section is quite well rounded for everyone, nostrils is only made up of skin and fat, then a tiny bit of muscle.
For dot 1, find the nostril cheek crease on the horizontal, move 3-4mm away into the nostril from that crease
For dot 2, place it on the side bulk of the nostril, I didn't really measure I just kinda eyeballed it out it was like 2mm off the crease but lower vertically.
(Note, some people might not even need 2 dots)
Pin from an upward angle that points down to the jaw/chin, I know it's odd, you'd have to manoeuvre the syringe with both hands.
Go 2mm deep, make sure not to go too deep or you'll hit the mucus membrane layer
Aspirate
Inject slowly, if it stings like really bad you prob hit the mucus membrane layer, move the needle back.
This section is quite well rounded for everyone, nostrils is only made up of skin and fat, then a tiny bit of muscle.
For dot 1, find the nostril cheek crease on the horizontal, move 3-4mm away into the nostril from that crease
For dot 2, place it on the side bulk of the nostril, I didn't really measure I just kinda eyeballed it out it was like 2mm off the crease but lower vertically.
(Note, some people might not even need 2 dots)
Pin from an upward angle that points down to the jaw/chin, I know it's odd, you'd have to manoeuvre the syringe with both hands.
Go 2mm deep, make sure not to go too deep or you'll hit the mucus membrane layer
Aspirate
Inject slowly, if it stings like really bad you prob hit the mucus membrane layer, move the needle back.
Healing
Massage areas shortly after treatment
Do not lie your head down for the next 3 hours or else migration will occur
If you have any tight plasters, apply them to the nose tip
Risk lookout
If you notice any sustained whiteness in skin, massage and warm the area aggressively
Boost
@Grilldaddy❤️
@bleeder
@loox
@nomi
@azvrael
@RRM
@Paul Benjamin
@wxnter
@BigDihDiddy
@Mafia bob
@Ferulian
@lowtiersubhuman
@Fidelis
@Verdam
@Vaelor
@Skitsuna
@Blackpillirony
@Spuffy
@Anna
@nate
@Cat.
@Monsieur Meow
@Schizotypalcel
@Starlet
@moonlight1
@Penalizer69
@Garce
@r**e
@David🦢
@rickydickydoodahgrimes
@Currycelloser
@Auggy
@man00
@TheBWCKing
@apatheia
@snow
@snoblomov
@Yani
@Clone
@yung foid
@giga.mia
@tuberculosisinmybal
@</3
@kimothy
@muscipla
@SASALELE
@draftLexy
@Ghoultune
@Molotongo
@Galvatron
@Sadist
@sociopath
@Orka
@Pento
@Volksstaffel
@AClonedTyrone
@Bloxy
@bloatcel-
@doll
@ecoli
@emeraldpill
@slenderpill
@Suomi Volksgrenadier
@foidslayer22
@imareasonableman
@Krusty
@misclick
@P1et
@PingPong
@Almighty Sigma Wolf
@insomnia
@RottingCarrie
@ruby
@Shkypot
@SILVER
@sparkle
@Superior
@CopingManiac
@Vampi
@vespertine
@trueceljester
@XY2M
@MoggingLater
@ItzyaboyJJ💯
@kifykify
@Mandy?
@TonyDr
@junebug
@Randomized
@ripjfk
@HerculesJr.
@aryy
@Bojack
@mentalcellll
@grey
@demented
@Lo Hey
@paulyune
@Byro
@Scandicel
@codzombiestard116
@#1 Shit Username
@Inanimate Pragmatist
@Tear
@Seymour
@Chifuyu
@Finn
@Trevorpsl
@volcel
@3 cucks 1 chair
@oceauine
@SevenColorCrystalBall
@Adam2.0
@Stardust_
@ltbscorp
@imSub5
@kafka ☭
@hurricane
@Grilldaddy❤️
@bleeder
@loox
@nomi
@azvrael
@RRM
@Paul Benjamin
@wxnter
@BigDihDiddy
@Mafia bob
@Ferulian
@lowtiersubhuman
@Fidelis
@Verdam
@Vaelor
@Skitsuna
@Blackpillirony
@Spuffy
@Anna
@nate
@Cat.
@Monsieur Meow
@Schizotypalcel
@Starlet
@moonlight1
@Penalizer69
@Garce
@r**e
@David🦢
@rickydickydoodahgrimes
@Currycelloser
@Auggy
@man00
@TheBWCKing
@apatheia
@snow
@snoblomov
@Yani
@Clone
@yung foid
@giga.mia
@tuberculosisinmybal
@</3
@kimothy
@muscipla
@SASALELE
@draftLexy
@Ghoultune
@Molotongo
@Galvatron
@Sadist
@sociopath
@Orka
@Pento
@Volksstaffel
@AClonedTyrone
@Bloxy
@bloatcel-
@doll
@ecoli
@emeraldpill
@slenderpill
@Suomi Volksgrenadier
@foidslayer22
@imareasonableman
@Krusty
@misclick
@P1et
@PingPong
@Almighty Sigma Wolf
@insomnia
@RottingCarrie
@ruby
@Shkypot
@SILVER
@sparkle
@Superior
@CopingManiac
@Vampi
@vespertine
@trueceljester
@XY2M
@MoggingLater
@ItzyaboyJJ💯
@kifykify
@Mandy?
@TonyDr
@junebug
@Randomized
@ripjfk
@HerculesJr.
@aryy
@Bojack
@mentalcellll
@grey
@demented
@Lo Hey
@paulyune
@Byro
@Scandicel
@codzombiestard116
@#1 Shit Username
@Inanimate Pragmatist
@Tear
@Seymour
@Chifuyu
@Finn
@Trevorpsl
@volcel
@3 cucks 1 chair
@oceauine
@SevenColorCrystalBall
@Adam2.0
@Stardust_
@ltbscorp
@imSub5
@kafka ☭
@hurricane
Last edited:
