- Joined
- Feb 20, 2025
- Messages
- 21,637
- Solutions
- 2
- Time Online
- 1mo 23d
- Reputation
- 56,757
- Location
- The Wonderland
Hi guys, I make a thread about Aqualyx, specifically attuned to facial dimorphism, this helps me optimise my dedicational skills, grammar, formatting, motivation, focus etc.
If I made spelling mistakes or whatever it's cuz I couldn't be bothered double checking
The dimorphism in the face is structurally determined by a lot of factors, most people focus on bone because that's water, there are muscular insertions also which are influenced by bone.
But one that stands out and actually affects your face a lot is the composition of your fat pads
Predominately these areas in particular (peep it
): I'm shit at paint
The fatty areas I marked contribute significantly to how masculine/striking your face looks.
If fatty:
- It can distort your 3/4 view, hiding the ogee curve and messing up how light hits the face
- It can distort your frontal, messing up maxillary prominence and mouth area, lip width (due to fat pads restricting freedom), Zygomatic prominence/sharpness
- Ultimately ruins facial depth
- Causes a more neotenous look
It is not exactly just a bone issue, it is seen in many different skulls which vary in structure.
Arnold Schwarznegger, who's skull isn't even that robust bone structure wise has it the most prominent imo
Alessandro Dellisola, who's structure is also more gracile shares this trait.
Alain Delon, who shares some differences in facial structure to the other 2, also has this trait.
I can show many more examples but you get the point, that deep contour is seen across various different structures regardless.
This is largely genetic mostly (found in euros/certain mena groups more often). It is also androgen based which is still influenced by genes, from androgenic fat pad repositioning you'd have to lean down in order for your body to actually redistribute the fat via lipolysis, it can't do that without losing weight, then it will store less fat in that area onward if you gain weight.
Alessandro Dellisola, who's structure is also more gracile shares this trait.
Alain Delon, who shares some differences in facial structure to the other 2, also has this trait.
I can show many more examples but you get the point, that deep contour is seen across various different structures regardless.
This is largely genetic mostly (found in euros/certain mena groups more often). It is also androgen based which is still influenced by genes, from androgenic fat pad repositioning you'd have to lean down in order for your body to actually redistribute the fat via lipolysis, it can't do that without losing weight, then it will store less fat in that area onward if you gain weight.
To replicate this composition, you will need Aqualyx which is an injectable fat dissolver.
(I will not say how many vials you need, as that varies with how many injection points you have and what dose of Aqualyx you use, buy 4 in case)
Resources needed:
(I will not say how many vials you need, as that varies with how many injection points you have and what dose of Aqualyx you use, buy 4 in case)
Resources needed:
- Vials of Aqualyx, preferably 4.
Search: 3 results found for "aqualyx"
Filler Warehouse - Shop dermal fillers, skin boosters, fat dissolve supplies and more. We ship aesthetic products and supplies including needles, sharps bins and gloves across the UK. Enjoy flexible delivery options for your last-minute orders.
filler-warehouse.co.uk
- Insulin needles 6-8mm ideally (use your brain and buy from Amazon)
- A dark marker, if you are blek then get like a pale one
- Alcohol swabs if you are a bitch
You do not need to draw out any arteries for this session, only one you can give a risk is your angular vein which you won't hit 90% of the time.
Aspirating
With needles, there is something called aspirating, basically once you have the needle pinned inside you, you pull back the syringe to see if any blood will flush into the syringe.
Should take 5-10s, if no blood rushes, you haven't hit an artery. If blood does rush then don't pin just take out the syringe and try again.
Aspirating
With needles, there is something called aspirating, basically once you have the needle pinned inside you, you pull back the syringe to see if any blood will flush into the syringe.
Should take 5-10s, if no blood rushes, you haven't hit an artery. If blood does rush then don't pin just take out the syringe and try again.
The Execution For the Buccal/Malars
Step 1:
I want you to listen to me like a good boy and draw line on your face with the marker. We are going to mark our face with lines first to map our specified structures more accurately.
Draw a line from the top of the tragun to the outer eye corner.
2.
You can swab before hand if you haven't cleaned your face (optional I've never swabbed)
Now draw a line from corner of the mouth to middle of the ear (slightly above the tragun aka ear hole flap)
3.
Clench your masseters, have a feel on where it lays next to the cheek fat, draw a line on the border of it, make sure it's near perfect. Call this the back wall
Note: added the previous Tragun to eye corner line for convenience, your face should look like this marking currently.
4.
From your mouth corner, go roughly 2 fingers (index and middle) away, draw vertical line where you think it borders
Should look like this, for a more frontal pov look below.
I want you to listen to me like a good boy and draw line on your face with the marker. We are going to mark our face with lines first to map our specified structures more accurately.
Draw a line from the top of the tragun to the outer eye corner.
2.
You can swab before hand if you haven't cleaned your face (optional I've never swabbed)
Now draw a line from corner of the mouth to middle of the ear (slightly above the tragun aka ear hole flap)
3.
Clench your masseters, have a feel on where it lays next to the cheek fat, draw a line on the border of it, make sure it's near perfect. Call this the back wall
Note: added the previous Tragun to eye corner line for convenience, your face should look like this marking currently.
4.
From your mouth corner, go roughly 2 fingers (index and middle) away, draw vertical line where you think it borders
Should look like this, for a more frontal pov look below.
Step 2:
Now, since we are done drawing out one section, we are going to then grid it.
Everyone is different, you should not grid over the mandible bone stop just right above it.
Spaced 1cm, vertically and horizontally, in most faces it will be 2x 6 dot vertical rows starting from the back wall
with a 5 dot row sitting closest towards the mouth
My gridding on paint is shit, please try to do this accurately on your face.
Also, make sure the top columns are always placed under the cheekbones where it is fatty, there should be no gridding on actual bone.
Now, since we are done drawing out one section, we are going to then grid it.
Everyone is different, you should not grid over the mandible bone stop just right above it.
Spaced 1cm, vertically and horizontally, in most faces it will be 2x 6 dot vertical rows starting from the back wall
with a 5 dot row sitting closest towards the mouth
My gridding on paint is shit, please try to do this accurately on your face.
Also, make sure the top columns are always placed under the cheekbones where it is fatty, there should be no gridding on actual bone.
- 0.2ml low-moderate.
- 0.3 ml moderate.
- 0.4ml solid dose for a meaningful impact.
Note: This is per spot btw, doses are relative, if this area is already quite shallow then pick a suitable dose.
Tip: you can draw multiple doses in your needle, instead of doing one at a time
Actual pinning:
I can't really demonstrate it since I'm not there with you like your papa, but listen up.
Tip: you can draw multiple doses in your needle, instead of doing one at a time
Actual pinning:
I can't really demonstrate it since I'm not there with you like your papa, but listen up.
- Top horizontal rows should be pinned in an upward angle towards the diagonal border.
- Middle and bottom rows should be pinned close to 90 degrees
- The column near the mouth should be pinned in an angle pointing slightly away from it
- The column near the masseter should be pinned in an angle pointing slightly away from it
- Do not inject too fast, slow down when uncomfortable.
- Go fully into the fat with your 6-8mm syringe
Wow you are done, now replicate it on the other side too
The Execution For the MidfaceBtw, don't do this if your midface is already hollow, only do this if it's fatty. If you do this with an already hollow midface you will just age yourself a bit more.
The artery will be quite close to the injection point.
With good practice you will easily dodge it as it sticks at the base of the nose, you can even feel it's pulse if you firm your finger there.
Anyway, aspiration is a tool to be used in this case if you want to double check if you hit something.
Step 1:
Draw more fucking lines, this time a rectangle on your midface.
The bottom line of the rectangle should start at the base of the nose, make sure it starts roughly a finger away from your nostrils.
The width of the rectangle should be 2cm.
The roof of the rectangle should start 1.5 - 2cm down from the lower eyelid, make sure it doesn't cut into the tear trough.
Draw the vertical walls of the rectangle
Draw more fucking lines, this time a rectangle on your midface.
The bottom line of the rectangle should start at the base of the nose, make sure it starts roughly a finger away from your nostrils.
The width of the rectangle should be 2cm.
The roof of the rectangle should start 1.5 - 2cm down from the lower eyelid, make sure it doesn't cut into the tear trough.
Draw the vertical walls of the rectangle
Rough illustration, if it doesn't look identical to this do not worry. Just make sure to avoid the tear trough, any immensely boned areas, or being too close to the nose.
Step 2:
Time to grid the fat pig
3 dots, in an order of 2 vertical columns, spaced 1cm apart both vertically and horizontally
Do not worry if yours doesn't look identical, everyone's anatomy is quite different and I am also shit at paint.
Time to grid the fat pig
3 dots, in an order of 2 vertical columns, spaced 1cm apart both vertically and horizontally
Do not worry if yours doesn't look identical, everyone's anatomy is quite different and I am also shit at paint.
Step 3:
Time to inject more fluid into our faces.
ONLY DO 0.2ML, 0.1ML IF IT IS EXTREMELY SHALLOW WHICH YOU SHOULDN'T EVEN BE PINNING
Time to inject more fluid into our faces.
ONLY DO 0.2ML, 0.1ML IF IT IS EXTREMELY SHALLOW WHICH YOU SHOULDN'T EVEN BE PINNING
- You can go all the way in with your needle, can pick a slight deviated angle also
- I recommend to pinch a bit to get a feel for the fat
- Do not inject upward towards the tear through, don't be fucking silly
- Inject slowly as always
- I'd recommend always aspirating in this area
Healing process
You will look like JD Vance for a few days, so fucking cute. You will also experience bloating for weeks, usually dissipates greatly by week3, actual results will come in week 4-6
You will look like JD Vance for a few days, so fucking cute. You will also experience bloating for weeks, usually dissipates greatly by week3, actual results will come in week 4-6
- Massage areas after injection, use a cold compress a bit to lower inflammation
- Massage areas almost daily to make sure fluid doesn't get stuck and aid the healing process
- Lying down a lot slows down the healing process, if you do cardio it helps lymphatic drainage.
- When your face is depuffed enough and not sensitive, unironically do the Gua Sha bullshit for a few weeks.
@Blackpillirony @Spuffy @2ANA @nate @Cat. @Monsieur Meow @Schizotypalcel @Starlet @moonlight1 @Marlonmogsyouhaha @sociopath @Garce @Glamour @David🦢 @97baHater @rickydickydoodahgrimes @Currycelloser @Auggy @apatheia @snow @snoblomov @Yani @Dean @Clone @yung foid @Huntergirl @giga.mia @tuberculosisinmybal @hazyfuture @</3 @kimothy @muscipla @Randomized Shame @SASALELE @draftLexy @Ghoultune @Molotongo @Galvatron @Sadist @sociopath @Orka @Volksstaffel @AClonedTyrone @BigDihDiddy @Bloxy @bloatcel- @doll @ecoli @emeraldpill @foidslayer22 @imareasonableman @Inanimate Pragmatist @kifykify @Krusty @milkjar @P1et @PingPong @Randomized Shame @insomnia @RottingCarrie @ruby @Shkypot @SILVER @sparkle @Superior @Tory @Vampi @vespertine @Xx_SteinbergCleanser_xX @xy2m @sparkle jump rope queen
Attachments
Last edited:
